Banding Trimmer Chamfer For Woodworking

68 reviews for Banding Trimmer Chamfer For Woodworking

1. Bridget MontoyaVerified Purchase

   Rated 5 out of 5

   Product is easy to apply with an old house iron. The veneer was applied to a plywood edge and stained as follows: wiping lacquer stain, followed by a ...More

   Product is easy to apply with an old house iron. The veneer was applied to a plywood edge and stained as follows: wiping lacquer stain, followed by a lacquer wash coat, then lightly sanded with 320 sandpaper. A gel stain was then wiped on and two coats of stain lacquer applied. The veneer did not buckle during this process. When complete it is impossible to tell the difference between the plywood veneer and the edge banding. This was the first time that an edge band veneer has been used in our trim applications. Almost 200 linear feet was applied and finished without a single problem. We will purchase this product agaiin.
   Kamil BarryVerified Purchase

   Rated 5 out of 5

   Used this to trim 3/4" Oak veneer I glued over 3/4" plywood. Works as expected. I like the double knives. Very little sanding required.
   Naima DelgadoVerified Purchase

   Rated 5 out of 5

   Used this edge trimmer this week and found it did an excellent job cutting the edge tape and leaving a minimum for sanding, great product
   Wilson WashingtonVerified Purchase

   Rated 5 out of 5

   Used it to trim the edge banding for our kitchen renovation. Just a word of caution though, wear gloves! I caught a couple of nasty splinters
   Teresa MckayVerified Purchase

   Rated 5 out of 5

   Worked well for its intended job. Made cutting mezzanine easy. I only use it on 100 linear feet so I'm not sure how to hold up over period of time
   Harris CarrollVerified Purchase

   Rated 5 out of 5

   A little bulky to fit in the plam of your hand, for trimming the veneer on both edges of the panel.... However, the tool works great...saves sanding t...More

   A little bulky to fit in the plam of your hand, for trimming the veneer on both edges of the panel.... However, the tool works great...saves sanding time and cost!!
   Eleni PattersonVerified Purchase

   Rated 5 out of 5

   So far so good. I've used it for a couple of small projects. I don't know how long the blades will last before they aren't sharp enough to glide throu...More

   So far so good. I've used it for a couple of small projects. I don't know how long the blades will last before they aren't sharp enough to glide through the banding smoothly.
   Declan MccarthyVerified Purchase

   Rated 5 out of 5

   We order this item to smooth away binding which we order as well; but we have not used it yet since we are still building cabinets. But I hope it does...More

   We order this item to smooth away binding which we order as well; but we have not used it yet since we are still building cabinets. But I hope it does it's job. A good buy overall
   Elspeth LeachVerified Purchase

   Rated 5 out of 5

   This is my first time to use a trimmer like this and I was pleasantly surprised using it with birch veneer. Every edge turned out great. One of life's...More

   This is my first time to use a trimmer like this and I was pleasantly surprised using it with birch veneer. Every edge turned out great. One of life's little secrets that this thing exists!
   Alicia TuckerVerified Purchase

   Rated 5 out of 5

   This trimmer will not trim both sides at once for stock smaller than 1/2” but does trine one side at a time