Square Slot Cutter

69 reviews for Square Slot Cutter

1. 

   Kareena PritchardVerified Purchase

   Rated 5 out of 5

   I was a bit weary about ordering this but I thought to myself, Ive wasted more money on worse things in the past so I decided to give it a try. They w...More

   I was a bit weary about ordering this but I thought to myself, Ive wasted more money on worse things in the past so I decided to give it a try. They work amazing and I’ve since bought the double gang cutout as well. It’s a bit shaky to get it started so I would recommend that would just push from the get go. If you ease into it, they jump around a bit when starting but if you just dive in, they get going. At least on drywall. I have not actually used them on anything else. I mainly do remodeling and add a lot of low voltage spots like Ethernet and RG6 but have ran plenty of new switches as well. Don’t waste time with a keyhole saw anymore. This is half the time.
   

   Frederic MelendezVerified Purchase

   Rated 5 out of 5

   Where have you been all my life? LOVE this device. Takes a firm hand, don't be timid, and make sure there is not a stud behind where you want to place...More

   Where have you been all my life? LOVE this device. Takes a firm hand, don't be timid, and make sure there is not a stud behind where you want to place the junction box. I put a sheet of paper, blue-taped to the baseboard, to capture all the dust. There will be dust. But the cutout chunk also is FANTASTIC to use for taking to paint store to get a perfect match if needed. Put in ziplock, and label it, store it safely for the future. I just wish I needed to make a bunch more holes in my walls...
   

   Saira McdougallVerified Purchase

   Rated 5 out of 5

   This product worked great. It is much better than using a saw. It cuts clean and accurately. I used it with an "Old Work Outlet Box" that I found on A...More

   This product worked great. It is much better than using a saw. It cuts clean and accurately. I used it with an "Old Work Outlet Box" that I found on Amazon and I had a new cable/phone outlet in the wall in about 15 minutes (not including running wire).
   Rosemary PorterVerified Purchase

   Rated 5 out of 5

   Wow what an amazing life thing, working in low voltage and high voltage this is an amazing improvement over hand cutting, Trane your template and alig...More

   Wow what an amazing life thing, working in low voltage and high voltage this is an amazing improvement over hand cutting, Trane your template and align the blades to cut a perfect jbox... Will be purchasing the 2 gang for sure and can't wait, this did make cutting a 2 gang easy also, but better if all was cut at once....
   Stephanie O’DohertyVerified Purchase

   Rated 5 out of 5

   I install TVs and routers all the time and was sick of the sloppy drywall saw job I was doing. Yes, it was probably user error but I have been making ...More

   I install TVs and routers all the time and was sick of the sloppy drywall saw job I was doing. Yes, it was probably user error but I have been making perfect boxes with this tool. The tool has paid for itself in less than 2 jobs with the time and frustration I have saved myself. I think I might invest more in this brand's other products. I must add try not to get too close to the stud, I was fixing an ISP installers botch job where he just drilled 2 holes side by side. but he just missed the stud by a hair and I hit the stud. No big deal it just means the tool didn't cut the sheetrock all the way and I had to finish it by hand with a razor. I think I have Used this tool 7 times in less than a month. Best time saver.
   Regan PerryVerified Purchase

   Rated 5 out of 5

   Super easy to use, clips onto almost any oscillating tool. Give it a small rock back and forth and let the tool do the work. Give it a firm press unti...More

   Super easy to use, clips onto almost any oscillating tool. Give it a small rock back and forth and let the tool do the work. Give it a firm press until the blades bite into the drywall, then just let the tool do the cutting. A++ I just ordered another for my toolbox as a backup.
   Jagoda SpenceVerified Purchase

   Rated 5 out of 5

   I have found this addition to the tool box. While it didn’t save as much time cutting in outlets, where it really excels is when you have to fish a wa...More

   I have found this addition to the tool box. While it didn’t save as much time cutting in outlets, where it really excels is when you have to fish a wall. Having all the pieces of drywall be identical, makes the wall repair tons easier. The fine powder that this bit creates is easily to control by either taping a shop vac hose with painters tape below the hole. Alternatively, i tape an envelope, box or folded piece of paper to catch the dust as it falls.
   Mehmet AthertonVerified Purchase

   Rated 5 out of 5

   The design of this product is good for its intended use. But the longevity will be dependent upon the material being cut. When properly used, this cut...More

   The design of this product is good for its intended use. But the longevity will be dependent upon the material being cut. When properly used, this cutter should speed up the process of creating box holes for various electrical boxes. Best results will be achieved if the oscillator is allowed to do the work. Price seems a little high for the application.
   Khadeeja MoranVerified Purchase

   Rated 5 out of 5

   Awesome tool. Cut a perfect single gang Sheetrock outlet in a minute. Got two layers of drywall? Will take about three minutes. No stress on the drywa...More

   Awesome tool. Cut a perfect single gang Sheetrock outlet in a minute. Got two layers of drywall? Will take about three minutes. No stress on the drywall like when using a holesaw. Tool in one hand, vacuum in the other, no mess to clean up. Quite loud, use earplugs if you are cutting lots of holes. Does not cut thru metal studs so drill an exploration hole to confirm no obstructions (or waterpipe or AC etc). Awesome tool.
   Amal ZunigaVerified Purchase

   Rated 5 out of 5

   This tool has simplified things so much. I have tried templates. Eh. I have used the Dewalt cut-out tool. The results are not consistent. I have used ...More

   This tool has simplified things so much. I have tried templates. Eh. I have used the Dewalt cut-out tool. The results are not consistent. I have used a jab saw. You probably want/need things to move more quickly. This tool cuts a clean hole every time. The teeth bite right away so there is no skate. Typically I cut the hole in 10-15 sec. I can't say anything bad about this tool.