Folding Electric Car Throttle Handle with LED Display and Key Lock

71 reviews for Folding Electric Car Throttle Handle with LED Display and Key Lock

1. Umair RobertsonVerified Purchase

   Rated 5 out of 5

   This is a great product, don't be an idiot. If the throttle doesn't fit don't force it on. You will need to sand down the bar a bit to make sure it fi...More

   This is a great product, don't be an idiot. If the throttle doesn't fit don't force it on. You will need to sand down the bar a bit to make sure it fits. The guy below probably tried to force it on, then realizing it won't go all the way in tried to pull it off and then the plastic throttle ripped off, obviously it comes apart thats how its put together, if you can't snap it together like I did mine your dense.(yeah it happened to me to) This is a wonderful product i just wish the connectors weren't crimped so i could modify the length of the cable and still use the connectors, and the led was brighter or adjustable.
   Brooke FrederickVerified Purchase

   Rated 5 out of 5

   This throttle was the same as the old broken one I had my on my e500. It took a while to put on or figure out but he is some instructions. First pull ...More

   This throttle was the same as the old broken one I had my on my e500. It took a while to put on or figure out but he is some instructions. First pull handle grip off handle then push old throttle off with rubber malet or rubber hammer. Next open up the battery compartment with screen facing forwards with tiny handle on it. Unscrew it. Then unplug red connector cable from batter to controlle switch. Next unscrew the two screws parallel to each other to open control compartment and find cable labeled throttle unconnect it then push it out hole. Finally put new connector in control compartment and wire up to the handle and put on Throttle then grip
   Madiha WarnerVerified Purchase

   Rated 5 out of 5

   I'm a bit of an electric vehicle nerd and one of my problems with early hub motor kits has been junk throttles that short out when they sense a drop o...More

   I'm a bit of an electric vehicle nerd and one of my problems with early hub motor kits has been junk throttles that short out when they sense a drop of rain is within a 100 miles. I'd taken to putting plastic bags over them to try and save them when riding in the rain. This set is similar to a friend's but feels like better plastic and I like the display as the hub motor kit I put on a long time ago has no display of it's own. I also got a new controller that allows useage of the 3 speed switch so I can have a mode that slows my top end down. Only issue is that the throttle and controller have different plugs for that use so I will have to clip one of them once I find a compatible plug end. Also presently not using the grip as I have a twist shifter on the other side. Hoping I can figure out a way to swap the grip on the shifter for this one. I've also contemplated opening it up and using my glue gun to pot the electronics inside for better weather protection, not sure if that might be a good idea or not.
   Keelan DownsVerified Purchase

   Rated 5 out of 5

   It just wont fit on my bike, my old throttle has 6 wires and this one only has 5, and i cant find a pinout diagram for either throttle or the motor co...More

   It just wont fit on my bike, my old throttle has 6 wires and this one only has 5, and i cant find a pinout diagram for either throttle or the motor controller. I have a 26" rear wheel conversion kit from voilamart, if anyone knows of a compatible motor controller i can use with my kit and this throttle id buy it right away.
   Lianne MairVerified Purchase

   Rated 5 out of 5

   Well it came broken and nonfunctional out of the shipping bag. I had to take it apart and line up the spring and reassemble to get it to work. Wiring ...More

   Well it came broken and nonfunctional out of the shipping bag. I had to take it apart and line up the spring and reassemble to get it to work. Wiring information was pretty minimal. I just had to guess and hope for the best with my controller. I got it to work but had to remove the connectors it comes with for a new adapters reused from my ebikes original harness.
   Sulayman PinedaVerified Purchase

   Rated 5 out of 5

   i was able to find a throttle exactly like my old one and it had a pinout for each wire, so i was actually able to use this after about an hour of lab...More

   i was able to find a throttle exactly like my old one and it had a pinout for each wire, so i was actually able to use this after about an hour of labeling and soldering some wires. At this moment im every bit satisfied 5 stars
   Lola-Mae HandleyVerified Purchase

   Rated 5 out of 5

   Love the product. I have this installed on my 2019 Peterbilt 389. Customer support is fast, responsive, and willing to help! I have actually been prom...More

   Love the product. I have this installed on my 2019 Peterbilt 389. Customer support is fast, responsive, and willing to help! I have actually been promoting this product on my IG and TT page for a while now. Definitely recommend!
   Rayhan HollowayVerified Purchase

   Rated 5 out of 5

   It is a direct replacement and is Currie branded on the throttle. The travel of the throttle is nice and springs back into place when released. This m...More

   It is a direct replacement and is Currie branded on the throttle. The travel of the throttle is nice and springs back into place when released. This makes my eZip 750 feel brand new. If you have the 5 pin throttle control pick this up.
   Erin LiuVerified Purchase

   Rated 5 out of 5

   It came on time.. I can’t figure out how to hook it up to my controller for my new ebike.. neither the controller nor this throttle came with wiring d...More

   It came on time.. I can’t figure out how to hook it up to my controller for my new ebike.. neither the controller nor this throttle came with wiring diagrams or explain what each of there wires are for.. so it’s useless until I can’t get these wiring diagrams
   Kaleem DoughertyVerified Purchase

   Rated 5 out of 5

   I have 4, 20 year old Zappy scooters. I used these to upgrade and modernize the scooter. It works great. Kids love being able to dead start without ha...More

   I have 4, 20 year old Zappy scooters. I used these to upgrade and modernize the scooter. It works great. Kids love being able to dead start without having to run the scooters up to speed first. Decent throttle sensitivity and much easier to control vs. the old method of feathering the throttle.